maMoS-300/400 - Stationary Gas Monitor for 3 or 4 gas components

oWorldwide competence


	USA

maMoS-300/400

Pictures

Stationary Gas Monitor
for 3 or 4 gas components

Low-cost gas monitor, with 3 or 4 electrochemical or IR sensors, for permanent display of 3 or 4 gas components. Comes complete with filter, peltier dryer and condensate pump. maMoS is equipped with analog outputs and a PC interface.

Description

maMoS is a high quality gas monitor. The device is produced using the latest technology. Due to the modular design of maMoS it is possible to meet the individual client's expectations by adjusting it to performing particular measurements, such as concentration of various gases, pressure, temperature and a number of boiler parameter measurements.
The monitor is in particular designed for flue (boiler) gas analysis, but it can be used for different purposes (such as producing biogas from garbage and animal excrements) as well.
Each maMoS monitor, according to its configuration, enables the user to measure concentrations of one or more gases. Additionally the device can present the measurement results on the liquid crystal displays and up to eight analogue outputs. Independently of the built-in measurement equipment there is also the possibility of reading the measurement results and changing the settings with the help of the computer programme provided.

Product info

Technical data

Measuring ranges

Folder maMoS-300 (80 kB)

Folder maMoS-400 (80 kB)

Manual (5 MB)

Control software (15 MB)

Measurement of gas concentrations

Gas concentrations measured with NDIR sensors: CO, CO2, CH4, N2O
Gas concentrations measured with partial pressure sensor: O2
Gases measured electrochemically: CO, NO, NO2, SO2, H2S, H2

Other measurements

Atmospheric pressure
Differential pressure
Temperature using thermocouples
Temperature using thermistors Pt-500

Application possibilities

Software capabilities

Biogas plants
Landfills
Greenhouses
Stationary monitoring of burner systems
Process control in various industries (cement, glass, incineration etc.)
Monitoring for air quality control, for example: CO2 (0...2000ppm) or CH4 (0...5%)

Stationary operation: Zeroing and measurement times user programmable
Permanent automatic check of the instruemnt
Compensation of cross sensitivity and temperature drift of gas sensors

Processing and presentation of measured data

Hardware capabilities

Gas concentrations shown as ppm or mg/m3
All results shown as instantaneous values on display
Averaging of all measured values. Averaging time: 2 - 60 seconds for IR sensors and 2 - 30 seconds for EC sensors
Optional: Datalogger with 256MB MMC (Memory card)
Powerful PC program for analyser settings and data communication
Optional calculation of combustion parameters: Lambda, qA, Eta
Optional calculation of NOx from NO or NO and NO2

ABS housing for wall-mounting with internal ventilation
Microprocessor controlled
Correction of IR sensors with zero and one calibration gas possible
IR sensors (CO2 and CH4) with short reaction time (T90 < 15 seconds)
Integrated Peltier sample conditioner with cndensate pump and filter
Solenoid valve for automatic ventilation during zeroing
Membrane pump for sample extraction
4 current (0/4 - 20 mA) and 4 voltage (0 - 10 V). Freely allocated to the measurment channels
Optional integrated clock/calendar
Up to 3 LCD displays. Freely allocated to the measurment channels
RS232C or RS485 connection for data transfer
Optional: Converter for connection to USB or Ethernet
PC programme for quick and simple configuration of hte instrument and data transfer