oWorldwide competence Home | News | Products | About us | Support | Contact us
USA
Mini dryer
The minidryer simply adds onto the portable flue gas analyser and removes the condensate from the sample after quickly cooling it. The internal peristaltic pump then removesthe moisture to the outside. The minidryer is partly protection for the instrument in that no condensate can get inside the gas system, which is especially important if the instruemnt is fitted with infrared sensors for carbon dioxide or methane. Thsi would cause fogging of the optics and a loss of accuracy. It is also a help when measuring solucle gases such as NO2 or SO2.
Compact Peltier gas dryer with condensate pump
Your value-for-money option in gas conditioning. This compact device cools the gas using a Peltier element and removes the condensate produced with the integrated peristaltic pump. Use of the MiniDryer improves measurement accuracy and increases the lifetime of the sensors and pump appreciably.
Description
  • Designed for our GA-21plus/GA-40 plus analysers, but can be used with most of our instruments.
  • Power supply direct from the probe connection.
  • Fully automated - no external adjustments necessary.
  • Professional quality with Peltier element, fan and peristaltic pump.
Product info
Folder (110 kB)

Operating data

  • Power supply: 10 ÷ 15V AC from the probe connector on the analyser
  • Power requirement: approx. 14 W
  • Operating temperature: 0°C ÷ 30°C
  • Storage temperature: -20 ÷ +55°C
  • Size: W x H x D: 52 x 120 x 125 mm
  • Weight: approx. 0.75 kg
Technical data
Cooler
Method Condensation due to rapid cooling
Cooler unit Peltier element with fan
Dew point 12°C below ambient, not below +4°C, electronically controlled
Dead capacity approx. 15 cc
Operational after 10 min, dependent on ambient temperature
Condensate pump
Type Peristaltic pump
Flow rate approx. 100 cm3/h
A

Copyright © 2007  madur USA. All rights reserved.